2 Post Lift TP-140B
Features:.
• 2 Post gantry type – with double points lock release.
• 5mm “international standard” column steel plates made in shanghai.
• 8mm brace arm and 6mm internal sliding column – newer deform.
• Double safe antiskid device – from column ladder safe to close protection by dynamic hydraulic pressure.
• Chain style pulling device – make the security parameter up to 5 times
• Total mold tooling technology – to ensure the conformity of both many holesand welding places.
• Aluminium pump device – running time without any break down for at least 40,000 h.
• Mechanical control hydraulic pressure configuration – simple, endurable and reliable.
• Homologated and certified product according to the European Directive EN1493:1998+A1:2008
• Synchronization of hydraulic cylinders independent from load distribution with cable leveling system
• Mechanical safeties in each post with automatic engagement and electromagnet operated release
• Automatic arm locking
• Automatic stop at maximum lifting height
• Overload valve equipped
• “Dead man” operation by 24V push buttons
• Manual emergency lowering
• Lifting adaptor with three height extensions
Technical Specification
Max Lifting Height – 1,800 mm
Lifting Speed – 40-60 sec
Lowering Speed – 25-35 sec
Lifting Capacity – 4,000 kg
Voltage – 110V/50Hz/60Hz, 220V/50Hz/60Hz, 380V/50Hz
Weight – 610 kg
Click here to request a quote
4 Post Alignment lift with Jacking Beam TP-6740
Features:.
• Pneumatic auto-safety release and electric lowering system.
• Slipping plates and one rolling jack are standard accessories.
• Power unit with the emergency pomp.
• Turntable are excluded.
• Homologated and certified product according to the European Directive EN1493:1998+A1:2008
• Mechanical safeties in four posts with automatic engage ment and air-operated release
• Cable slack safety included in each post to prevent the lift lowering in case that a steel cable is broken
• A jack beam for 2.5ton capacity with adjustable arms and lifting adaptors, included as a standard accessory
• Long rear slipping plates and adjustable turntable recesses
• Automatic stop at the maximum lifting height
• Overload valve equipped
• Manual emergency lowering
• “Dead man” operation by 24V push buttons
Technical Specification
Max Lifting Height – 1,850 mm
Runways lenght – 4,8 m
Runways widht – 600 mm
Lifting Capacity – 4,000 kg
Click here to request a quote
Alignment Scissors Lift TP-8250
Features:.
• The turntable position can be adjusted in 2 directions, vertically and longitudinally.
• Synchronization controlled by the photocell.
• Manual emergency lowering.
• 24V DC low tension voltage.
• Homologated and certified product according to the European Directive EN1493:1998+A1:2008
• Lift suitable for surface or in-ground installation
• Hydraulic synchronization with safety device to avoid unexpected uneven of platforms
• Mechanical safety with air -operated engagement and release
• Automatic stop at the maximum lifting height
• Automatic safety stop at 400 mm height and beeper during the last phase of the descent
• Play detector can be equipped as an optional accessory
• Overload valve equipped
• Manual emergency lowering
• “Dead man” operation by 24V push buttons
Technical Specification
Max Lifting Height – 2,160 mm (net lifting height: 1,870 mm)
Min Lifting Height – 300 mm
Runways length – 5,200 mm
Leveling accuracy – 1 mm
Lifting Capacity – 5,000 kg
Click here to request a quote
Low Profile Scissor Lift TP-7230A
Features:.
• Parachute value included.
• Possibility for emergancy manual lowering.
• 24V DC low tension voltage.
• 2 limit switch’s for Max height and safety height.
• Homologated and certified product according to the European Directive EN1493:1998+A1:2008
• Four hydraulic cylinders to ensure powerful lifting capacity
• Lift suitable for surface or in-ground installation
• Low profile platforms 112 mm permit the lifting of low vehicles
• Hydraulic synchronization with safety device to avoid unexpected uneven of platforms
• Automatic stop at the maximum lifting height to protect the lift from over-high lifting
• Automatic safety stop at 400 mm height and beeper during the last phase of the descent
• “Locked type ramps” for platform extensions
• Parachute valve equipped
• Overload valve equipped
• Manual emergency lowering
• “Dead man” operation by 24V push buttons
• Free maintenance self – lubricating bushings
Technical Specification
Max Lifting Height – 1,900 mm
Lifting Capacity – 3,000 kg
Min. lowered height – 112 mm
Click here to request a quote
Portable Scissor Lift TP-7530
Features:.
• Movable wheels can be easily conveniently to remove.
• Daul hydraulic cylinders and mechanical synchronism design with mechanical and pneumatic safety
• Device and cylinders with explosion-proof
• self-locking device.
• Manual descending is available when electricity is fail.
• Homologated and certified product according to the European Directive EN1493:1998+A1:2008
• Mobile type, handled by the power pack cart
• Hydraulic synchronization with assistant of bolster bar to avoid unexpected uneven of platforms
• Mechanical safeties with air-operated release
• Automatic stop at the maximum lifting height to protect the lift from over-high lifting
• Overload valve equipped
• Manual emergency lowering
• Dead man” operation by 24V push buttons
• Free maintenance self – lubricating bushings
Technical Specification
Lifting capacity – 3000kg
Lifting height – 1000mm
Min lowest height – 105mm
Length of lifting platform – 1420mm
Width of lifting platform – 490mm
Motor power/power supply – 2.2kw/220/380v/50/60hz
Click here to request a quote
