Lawrence Alignment Products
Model i9
⇒ Simple operation, get familiar in 5 minutes
⇒ Accurate measurement, responsible for car owners
⇒ Free rolling compensation for maximum efficiency
⇒ Three dimensional operation system leader
⇒ Three dimensional animated guidance
High-precision Industrial Digital Camera
Continuously monitoring on target position
Feedback on target state at any time
Providing accurate dynamic measuring results
Image Stablilizing System
Self-developed technology
Enable free rolling compensation
Stable shooting, accurate reading
Unique Accurate Targets
Small size applied to front and rear
Round corner design, more reasonable and humanized
Not affected by strong light
No electronic component or cable, low maintenance
3D Display Interface
Global origination
Authentic effect
Clear and easy to understand
Controllable, more user-friendly
A Whole-process Animated Instructions
Complimentary reminding
Vivid and humanized
Hand-held Aligner
Built-in wifi LAN system
Data display synchronized with monitor
Identify selected model automatically
Android system all applicable
Dual-display system
Great user-friendly in operation at any point
Camera with intelligent angle of view
Camera view changes with the height of the vehicle, available for measurement of any height
Wall-mounted column
Humanized design of wall-mounted column, saving ground installation space for users and sparing more space for alignment operation
Intelligent visual System
Automatically track targets and get the best measurement position
Two Adjustment Models
Two adjustment models of displaying the measuring and adjusting results are available in the program.
Free Rolling Compensation
No complex wheel compensation required for the wheel theoretic plane
One push only to complete the precise measurement
Shorter testing time
Jack Up Adjustment
After alignment measurement, the values can be frozen for jack up adjustment.
2/4 Wheel Alignment
Front wheel alignment is suitable for small bus, light trucks with long wheelbase, and pickups without rear wheels adjustment.
Engine Cradle Adjust
Provide visual reference for simultaneous S.A.I and caster adjustment for vehicles with front sub-frames or cradles.
Drive-on Camera Aid
The drive-on camera aid helps guide the proper parking of the vehicle to be aligned, ensuring safety and efficiency.
Patented Intelligent Digital Display
Friendly greeting in staring up
Warm reminding during operation
SmartToe 1
Adjust the toe without steering wheel holder for vehicls with big backlash.
The steering will be always center.
SmartToe 2
Turn the front wheels left or right and access difficult adjustment points while still displaying centered to readings
Reduce the redundant steps in front toe adjustment center
Cross Diagonal
Identifying vehicle frame or structural conditions
Good helper in alignment adjustment
Basic Measurement: toe, camber, caster, kingpin inclination, setback, thrust angle
Additional functions: max turning angle, toe-out-on-turn, tire radius, tire rotations rate, axle offset, wheel offset, track/wheelbase, two-wheel measurement, vehicle lifting measurement, alignment platform level detection, toe constant value measurement
Measurement Range and Accuracy
| Items | Camber | Caster | S.A.I | Toe | Setback | Thrust Angle | Wheel Offset | Axle Offset |
| Range | ±30° | ±40° | ±40° | ±30° | ±5° | ±5° | —— | —— |
| Accuracy | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1mm | ±1mm |
Comparison of alignment systems configuration
| No | Item | RS-10 | i-9 | RS-8 | RS-6 | i5 | i6 | H6 | RS-5 |
| 1 | Camera Crossbeam | √ | √ | √ | √ | √ | √ | √ | |
| 2 | Target Disks | √ | √ | √ | √ | √ | √ | √ | √ |
| 3 | Wheel Adaptors | √ | √ | √ | √ | √ | √ | √ | √ |
| 4 | Adaptor Hook | √ | √ | √ | √ | √ | √ | √ | √ |
| 5 | Computer | √ | √ | √ | √ | √ | √ | √ | √ |
| 6 | Software | √ | √ | √ | √ | √ | √ | √ | √ |
| 7 | Monitor | 21.5Inch | 32Inch | 32Inch | 32Inch | 14Inch | 32Inch | 21.5Inch | 21.5Inch |
| 8 | Printer | √ | √ | √ | √ | √ | √ | √ | √ |
| 9 | Mouse & Keyboard | √ | √ | √ | √ | √ | √ | √ | √ |
| 10 | Console | √ | √ | √ | √ | √ | |||
| 11 | Column | √ | √ | √ | √ | √ | √ | √ | |
| 12 | Turnplates & Wheel Chocks & Thrust Blocks | √ | √ | √ | √ | √ | √ | √ | √ |
| 13 | Steering Wheel Holder & Brake Pedal Depressor | √ | √ | √ | √ | √ | √ | √ | √ |
| 14 | Antistatic Needle | √ | √ | √ | √ | √ | √ | √ | √ |
| 15 | Drive-on Camera | √ | √ | √ | √ | √ | √ | √ | |
| 16 | Speaker | √ | √ | √ | |||||
| 17 | Lifting Control Box | √ | √ | √ | √ | √ | |||
| 18 | Remote Controller | √ | |||||||
| 19 | Audio Cable | √ | √ | √ | √ | √ |
Model RS-8
⇒ Simple operation, get familiar in 5 minutes
⇒ Accurate measurement, responsible for car owners
⇒ Free rolling compensation for maximum efficiency
⇒ Three dimensional operation system leader
⇒ Three dimensional animated guidance
High-precision Industrial Digital Camera
Continuously monitoring on target position
Feedback on target state at any time
Providing accurate dynamic measuring results
Image Stablilizing System
Self-developed technology
Enable free rolling compensation
Stable shooting, accurate reading
Unique Accurate Targets
Small size applied to front and rear
Round corner design, more reasonable and humanized
Not affected by strong light
No electronic component or cable, low maintenance
3D Display Interface
Global origination
Authentic effect
Clear and easy to understand
Controllable, more user-friendly
A Whole-process Animated Instructions
Complimentary reminding
Vivid and humanized
Hand-held Aligner
Built-in wifi LAN system
Data display synchronized with monitor
Identify selected model automatically
Android system all applicable
Dual-display system
Great user-friendly in operation at any point
Camera with intelligent angle of view
Camera view changes with the height of the vehicle, available for measurement of any height
Wall-mounted column
Humanized design of wall-mounted column, saving ground installation space for users and sparing more space for alignment operation
Intelligent visual System
Automatically track targets and get the best measurement position
Two Adjustment Models
Two adjustment models of displaying the measuring and adjusting results are available in the program.
Free Rolling Compensation
No complex wheel compensation required for the wheel theoretic plane
One push only to complete the precise measurement
Shorter testing time
Jack Up Adjustment
After alignment measurement, the values can be frozen for jack up adjustment.
2/4 Wheel Alignment
Front wheel alignment is suitable for small bus, light trucks with long wheelbase, and pickups without rear wheels adjustment.
Engine Cradle Adjust
Provide visual reference for simultaneous S.A.I and caster adjustment for vehicles with front sub-frames or cradles.
Drive-on Camera Aid
The drive-on camera aid helps guide the proper parking of the vehicle to be aligned, ensuring safety and efficiency.
Patented Intelligent Digital Display
Friendly greeting in staring up
Warm reminding during operation
SmartToe 1
Adjust the toe without steering wheel holder for vehicls with big backlash.
The steering will be always center.
SmartToe 2
Turn the front wheels left or right and access difficult adjustment points while still displaying centered to readings
Reduce the redundant steps in front toe adjustment center
Cross Diagonal
Identifying vehicle frame or structural conditions
Good helper in alignment adjustment
Basic Measurement: toe, camber, caster, kingpin inclination, setback, thrust angle
Additional functions: max turning angle, toe-out-on-turn, tire radius, tire rotations rate, axle offset, wheel offset, track/wheelbase, two-wheel measurement, vehicle lifting measurement, alignment platform level detection, toe constant value measurement
Measurement Range and Accuracy
| Items | Camber | Caster | S.A.I | Toe | Setback | Thrust Angle | Wheel Offset | Axle Offset |
| Range | ±30° | ±40° | ±40° | ±30° | ±5° | ±5° | —— | —— |
| Accuracy | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1mm | ±1mm |
Comparison of alignment systems configuration
| No | Item | RS-10 | i-9 | RS-8 | RS-6 | i5 | i6 | H6 | RS-5 |
| 1 | Camera Crossbeam | √ | √ | √ | √ | √ | √ | √ | |
| 2 | Target Disks | √ | √ | √ | √ | √ | √ | √ | √ |
| 3 | Wheel Adaptors | √ | √ | √ | √ | √ | √ | √ | √ |
| 4 | Adaptor Hook | √ | √ | √ | √ | √ | √ | √ | √ |
| 5 | Computer | √ | √ | √ | √ | √ | √ | √ | √ |
| 6 | Software | √ | √ | √ | √ | √ | √ | √ | √ |
| 7 | Monitor | 21.5Inch | 32Inch | 32Inch | 32Inch | 14Inch | 32Inch | 21.5Inch | 21.5Inch |
| 8 | Printer | √ | √ | √ | √ | √ | √ | √ | √ |
| 9 | Mouse & Keyboard | √ | √ | √ | √ | √ | √ | √ | √ |
| 10 | Console | √ | √ | √ | √ | √ | |||
| 11 | Column | √ | √ | √ | √ | √ | √ | √ | |
| 12 | Turnplates & Wheel Chocks & Thrust Blocks | √ | √ | √ | √ | √ | √ | √ | √ |
| 13 | Steering Wheel Holder & Brake Pedal Depressor | √ | √ | √ | √ | √ | √ | √ | √ |
| 14 | Antistatic Needle | √ | √ | √ | √ | √ | √ | √ | √ |
| 15 | Drive-on Camera | √ | √ | √ | √ | √ | √ | √ | |
| 16 | Speaker | √ | √ | √ | |||||
| 17 | Lifting Control Box | √ | √ | √ | √ | √ | |||
| 18 | Remote Controller | √ | |||||||
| 19 | Audio Cable | √ | √ | √ | √ | √ |
Model i6
⇒ Simple operation, get familiar in 5 minutes
⇒ Accurate measurement, responsible for car owners
⇒ Free rolling compensation for maximum efficiency
⇒ Three dimensional operation system leader
⇒ Three dimensional animated guidance
High-precision Industrial Digital Camera
Continuously monitoring on target position
Feedback on target state at any time
Providing accurate dynamic measuring results
Image Stablilizing System
Self-developed technology
Enable free rolling compensation
Stable shooting, accurate reading
Unique Accurate Targets
Small size applied to front and rear
Round corner design, more reasonable and humanized
Not affected by strong light
No electronic component or cable, low maintenance
3D Display Interface
Global origination
Authentic effect
Clear and easy to understand
Controllable, more user-friendly
A Whole-process Animated Instructions
Complimentary reminding
Vivid and humanized
Hand-held Aligner
Built-in wifi LAN system
Data display synchronized with monitor
Identify selected model automatically
Android system all applicable
Dual-display system
Great user-friendly in operation at any point
Camera with intelligent angle of view
Camera view changes with the height of the vehicle, available for measurement of any height
Wall-mounted column
Humanized design of wall-mounted column, saving ground installation space for users and sparing more space for alignment operation
Intelligent visual System
Automatically track targets and get the best measurement position
Two Adjustment Models
Two adjustment models of displaying the measuring and adjusting results are available in the program.
Free Rolling Compensation
No complex wheel compensation required for the wheel theoretic plane
One push only to complete the precise measurement
Shorter testing time
Jack Up Adjustment
After alignment measurement, the values can be frozen for jack up adjustment.
2/4 Wheel Alignment
Front wheel alignment is suitable for small bus, light trucks with long wheelbase, and pickups without rear wheels adjustment.
Engine Cradle Adjust
Provide visual reference for simultaneous S.A.I and caster adjustment for vehicles with front sub-frames or cradles.
Drive-on Camera Aid
The drive-on camera aid helps guide the proper parking of the vehicle to be aligned, ensuring safety and efficiency.
Patented Intelligent Digital Display
Friendly greeting in staring up
Warm reminding during operation
SmartToe 1
Adjust the toe without steering wheel holder for vehicls with big backlash.
The steering will be always center.
SmartToe 2
Turn the front wheels left or right and access difficult adjustment points while still displaying centered to readings
Reduce the redundant steps in front toe adjustment center
Cross Diagonal
Identifying vehicle frame or structural conditions
Good helper in alignment adjustment
Basic Measurement: toe, camber, caster, kingpin inclination, setback, thrust angle
Additional functions: max turning angle, toe-out-on-turn, tire radius, tire rotations rate, axle offset, wheel offset, track/wheelbase, two-wheel measurement, vehicle lifting measurement, alignment platform level detection, toe constant value measurement
Measurement Range and Accuracy
| Items | Camber | Caster | S.A.I | Toe | Setback | Thrust Angle | Wheel Offset | Axle Offset |
| Range | ±30° | ±40° | ±40° | ±30° | ±5° | ±5° | —— | —— |
| Accuracy | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1mm | ±1mm |
Comparison of alignment systems configuration
| No | Item | RS-10 | i-9 | RS-8 | RS-6 | i5 | i6 | H6 | RS-5 |
| 1 | Camera Crossbeam | √ | √ | √ | √ | √ | √ | √ | |
| 2 | Target Disks | √ | √ | √ | √ | √ | √ | √ | √ |
| 3 | Wheel Adaptors | √ | √ | √ | √ | √ | √ | √ | √ |
| 4 | Adaptor Hook | √ | √ | √ | √ | √ | √ | √ | √ |
| 5 | Computer | √ | √ | √ | √ | √ | √ | √ | √ |
| 6 | Software | √ | √ | √ | √ | √ | √ | √ | √ |
| 7 | Monitor | 21.5Inch | 32Inch | 32Inch | 32Inch | 14Inch | 32Inch | 21.5Inch | 21.5Inch |
| 8 | Printer | √ | √ | √ | √ | √ | √ | √ | √ |
| 9 | Mouse & Keyboard | √ | √ | √ | √ | √ | √ | √ | √ |
| 10 | Console | √ | √ | √ | √ | √ | |||
| 11 | Column | √ | √ | √ | √ | √ | √ | √ | |
| 12 | Turnplates & Wheel Chocks & Thrust Blocks | √ | √ | √ | √ | √ | √ | √ | √ |
| 13 | Steering Wheel Holder & Brake Pedal Depressor | √ | √ | √ | √ | √ | √ | √ | √ |
| 14 | Antistatic Needle | √ | √ | √ | √ | √ | √ | √ | √ |
| 15 | Drive-on Camera | √ | √ | √ | √ | √ | √ | √ | |
| 16 | Speaker | √ | √ | √ | |||||
| 17 | Lifting Control Box | √ | √ | √ | √ | √ | |||
| 18 | Remote Controller | √ | |||||||
| 19 | Audio Cable | √ | √ | √ | √ | √ |
Model H6
⇒ Simple operation, get familiar in 5 minutes
⇒ Accurate measurement, responsible for car owners
⇒ Free rolling compensation for maximum efficiency
⇒ Three dimensional operation system leader
⇒ Three dimensional animated guidance
High-precision Industrial Digital Camera
Continuously monitoring on target position
Feedback on target state at any time
Providing accurate dynamic measuring results
Image Stablilizing System
Self-developed technology
Enable free rolling compensation
Stable shooting, accurate reading
Unique Accurate Targets
Small size applied to front and rear
Round corner design, more reasonable and humanized
Not affected by strong light
No electronic component or cable, low maintenance
3D Display Interface
Global origination
Authentic effect
Clear and easy to understand
Controllable, more user-friendly
A Whole-process Animated Instructions
Complimentary reminding
Vivid and humanized
Hand-held Aligner
Built-in wifi LAN system
Data display synchronized with monitor
Identify selected model automatically
Android system all applicable
Dual-display system
Great user-friendly in operation at any point
Camera with intelligent angle of view
Camera view changes with the height of the vehicle, available for measurement of any height
Wall-mounted column
Humanized design of wall-mounted column, saving ground installation space for users and sparing more space for alignment operation
Intelligent visual System
Automatically track targets and get the best measurement position
Two Adjustment Models
Two adjustment models of displaying the measuring and adjusting results are available in the program.
Free Rolling Compensation
No complex wheel compensation required for the wheel theoretic plane
One push only to complete the precise measurement
Shorter testing time
Jack Up Adjustment
After alignment measurement, the values can be frozen for jack up adjustment.
2/4 Wheel Alignment
Front wheel alignment is suitable for small bus, light trucks with long wheelbase, and pickups without rear wheels adjustment.
Engine Cradle Adjust
Provide visual reference for simultaneous S.A.I and caster adjustment for vehicles with front sub-frames or cradles.
Drive-on Camera Aid
The drive-on camera aid helps guide the proper parking of the vehicle to be aligned, ensuring safety and efficiency.
Patented Intelligent Digital Display
Friendly greeting in staring up
Warm reminding during operation
SmartToe 1
Adjust the toe without steering wheel holder for vehicls with big backlash.
The steering will be always center.
SmartToe 2
Turn the front wheels left or right and access difficult adjustment points while still displaying centered to readings
Reduce the redundant steps in front toe adjustment center
Cross Diagonal
Identifying vehicle frame or structural conditions
Good helper in alignment adjustment
Basic Measurement: toe, camber, caster, kingpin inclination, setback, thrust angle
Additional functions: max turning angle, toe-out-on-turn, tire radius, tire rotations rate, axle offset, wheel offset, track/wheelbase, two-wheel measurement, vehicle lifting measurement, alignment platform level detection, toe constant value measurement
Measurement Range and Accuracy
| Items | Camber | Caster | S.A.I | Toe | Setback | Thrust Angle | Wheel Offset | Axle Offset |
| Range | ±30° | ±40° | ±40° | ±30° | ±5° | ±5° | —— | —— |
| Accuracy | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1mm | ±1mm |
Comparison of alignment systems configuration
| No | Item | RS-10 | i-9 | RS-8 | RS-6 | i5 | i6 | H6 | RS-5 |
| 1 | Camera Crossbeam | √ | √ | √ | √ | √ | √ | √ | |
| 2 | Target Disks | √ | √ | √ | √ | √ | √ | √ | √ |
| 3 | Wheel Adaptors | √ | √ | √ | √ | √ | √ | √ | √ |
| 4 | Adaptor Hook | √ | √ | √ | √ | √ | √ | √ | √ |
| 5 | Computer | √ | √ | √ | √ | √ | √ | √ | √ |
| 6 | Software | √ | √ | √ | √ | √ | √ | √ | √ |
| 7 | Monitor | 21.5Inch | 32Inch | 32Inch | 32Inch | 14Inch | 32Inch | 21.5Inch | 21.5Inch |
| 8 | Printer | √ | √ | √ | √ | √ | √ | √ | √ |
| 9 | Mouse & Keyboard | √ | √ | √ | √ | √ | √ | √ | √ |
| 10 | Console | √ | √ | √ | √ | √ | |||
| 11 | Column | √ | √ | √ | √ | √ | √ | √ | |
| 12 | Turnplates & Wheel Chocks & Thrust Blocks | √ | √ | √ | √ | √ | √ | √ | √ |
| 13 | Steering Wheel Holder & Brake Pedal Depressor | √ | √ | √ | √ | √ | √ | √ | √ |
| 14 | Antistatic Needle | √ | √ | √ | √ | √ | √ | √ | √ |
| 15 | Drive-on Camera | √ | √ | √ | √ | √ | √ | √ | |
| 16 | Speaker | √ | √ | √ | |||||
| 17 | Lifting Control Box | √ | √ | √ | √ | √ | |||
| 18 | Remote Controller | √ | |||||||
| 19 | Audio Cable | √ | √ | √ | √ | √ |
Model RS-10
⇒ Simple operation, get familiar in 5 minutes
⇒ Accurate measurement, responsible for car owners
⇒ Free rolling compensation for maximum efficiency
⇒ Three dimensional operation system leader
⇒ Three dimensional animated guidance
High-precision Industrial Digital Camera
Continuously monitoring on target position
Feedback on target state at any time
Providing accurate dynamic measuring results
Image Stablilizing System
Self-developed technology
Enable free rolling compensation
Stable shooting, accurate reading
Unique Accurate Targets
Small size applied to front and rear
Round corner design, more reasonable and humanized
Not affected by strong light
No electronic component or cable, low maintenance
3D Display Interface
Global origination
Authentic effect
Clear and easy to understand
Controllable, more user-friendly
A Whole-process Animated Instructions
Complimentary reminding
Vivid and humanized
Hand-held Aligner
Built-in wifi LAN system
Data display synchronized with monitor
Identify selected model automatically
Android system all applicable
Dual-display system
Great user-friendly in operation at any point
Camera with intelligent angle of view
Camera view changes with the height of the vehicle, available for measurement of any height
Wall-mounted column
Humanized design of wall-mounted column, saving ground installation space for users and sparing more space for alignment operation
Intelligent visual System
Automatically track targets and get the best measurement position
Two Adjustment Models
Two adjustment models of displaying the measuring and adjusting results are available in the program.
Free Rolling Compensation
No complex wheel compensation required for the wheel theoretic plane
One push only to complete the precise measurement
Shorter testing time
Jack Up Adjustment
After alignment measurement, the values can be frozen for jack up adjustment.
2/4 Wheel Alignment
Front wheel alignment is suitable for small bus, light trucks with long wheelbase, and pickups without rear wheels adjustment.
Engine Cradle Adjust
Provide visual reference for simultaneous S.A.I and caster adjustment for vehicles with front sub-frames or cradles.
Drive-on Camera Aid
The drive-on camera aid helps guide the proper parking of the vehicle to be aligned, ensuring safety and efficiency.
Patented Intelligent Digital Display
Friendly greeting in staring up
Warm reminding during operation
SmartToe 1
Adjust the toe without steering wheel holder for vehicls with big backlash.
The steering will be always center.
SmartToe 2
Turn the front wheels left or right and access difficult adjustment points while still displaying centered to readings
Reduce the redundant steps in front toe adjustment center
Cross Diagonal
Identifying vehicle frame or structural conditions
Good helper in alignment adjustment
Basic Measurement: toe, camber, caster, kingpin inclination, setback, thrust angle
Additional functions: max turning angle, toe-out-on-turn, tire radius, tire rotations rate, axle offset, wheel offset, track/wheelbase, two-wheel measurement, vehicle lifting measurement, alignment platform level detection, toe constant value measurement
Measurement Range and Accuracy
| Items | Camber | Caster | S.A.I | Toe | Setback | Thrust Angle | Wheel Offset | Axle Offset |
| Range | ±30° | ±40° | ±40° | ±30° | ±5° | ±5° | —— | —— |
| Accuracy | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1mm | ±1mm |
Comparison of alignment systems configuration
| No | Item | RS-10 | i-9 | RS-8 | RS-6 | i5 | i6 | H6 | RS-5 |
| 1 | Camera Crossbeam | √ | √ | √ | √ | √ | √ | √ | |
| 2 | Target Disks | √ | √ | √ | √ | √ | √ | √ | √ |
| 3 | Wheel Adaptors | √ | √ | √ | √ | √ | √ | √ | √ |
| 4 | Adaptor Hook | √ | √ | √ | √ | √ | √ | √ | √ |
| 5 | Computer | √ | √ | √ | √ | √ | √ | √ | √ |
| 6 | Software | √ | √ | √ | √ | √ | √ | √ | √ |
| 7 | Monitor | 21.5Inch | 32Inch | 32Inch | 32Inch | 14Inch | 32Inch | 21.5Inch | 21.5Inch |
| 8 | Printer | √ | √ | √ | √ | √ | √ | √ | √ |
| 9 | Mouse & Keyboard | √ | √ | √ | √ | √ | √ | √ | √ |
| 10 | Console | √ | √ | √ | √ | √ | |||
| 11 | Column | √ | √ | √ | √ | √ | √ | √ | |
| 12 | Turnplates & Wheel Chocks & Thrust Blocks | √ | √ | √ | √ | √ | √ | √ | √ |
| 13 | Steering Wheel Holder & Brake Pedal Depressor | √ | √ | √ | √ | √ | √ | √ | √ |
| 14 | Antistatic Needle | √ | √ | √ | √ | √ | √ | √ | √ |
| 15 | Drive-on Camera | √ | √ | √ | √ | √ | √ | √ | |
| 16 | Speaker | √ | √ | √ | |||||
| 17 | Lifting Control Box | √ | √ | √ | √ | √ | |||
| 18 | Remote Controller | √ | |||||||
| 19 | Audio Cable | √ | √ | √ | √ | √ |
Model RS-6
⇒ Simple operation, get familiar in 5 minutes
⇒ Accurate measurement, responsible for car owners
⇒ Free rolling compensation for maximum efficiency
⇒ Three dimensional operation system leader
⇒ Three dimensional animated guidance
High-precision Industrial Digital Camera
Continuously monitoring on target position
Feedback on target state at any time
Providing accurate dynamic measuring results
Image Stablilizing System
Self-developed technology
Enable free rolling compensation
Stable shooting, accurate reading
Unique Accurate Targets
Small size applied to front and rear
Round corner design, more reasonable and humanized
Not affected by strong light
No electronic component or cable, low maintenance
3D Display Interface
Global origination
Authentic effect
Clear and easy to understand
Controllable, more user-friendly
A Whole-process Animated Instructions
Complimentary reminding
Vivid and humanized
Hand-held Aligner
Built-in wifi LAN system
Data display synchronized with monitor
Identify selected model automatically
Android system all applicable
Dual-display system
Great user-friendly in operation at any point
Camera with intelligent angle of view
Camera view changes with the height of the vehicle, available for measurement of any height
Wall-mounted column
Humanized design of wall-mounted column, saving ground installation space for users and sparing more space for alignment operation
Intelligent visual System
Automatically track targets and get the best measurement position
Two Adjustment Models
Two adjustment models of displaying the measuring and adjusting results are available in the program.
Free Rolling Compensation
No complex wheel compensation required for the wheel theoretic plane
One push only to complete the precise measurement
Shorter testing time
Jack Up Adjustment
After alignment measurement, the values can be frozen for jack up adjustment.
2/4 Wheel Alignment
Front wheel alignment is suitable for small bus, light trucks with long wheelbase, and pickups without rear wheels adjustment.
Engine Cradle Adjust
Provide visual reference for simultaneous S.A.I and caster adjustment for vehicles with front sub-frames or cradles.
Drive-on Camera Aid
The drive-on camera aid helps guide the proper parking of the vehicle to be aligned, ensuring safety and efficiency.
Patented Intelligent Digital Display
Friendly greeting in staring up
Warm reminding during operation
SmartToe 1
Adjust the toe without steering wheel holder for vehicls with big backlash.
The steering will be always center.
SmartToe 2
Turn the front wheels left or right and access difficult adjustment points while still displaying centered to readings
Reduce the redundant steps in front toe adjustment center
Cross Diagonal
Identifying vehicle frame or structural conditions
Good helper in alignment adjustment
Basic Measurement: toe, camber, caster, kingpin inclination, setback, thrust angle
Additional functions: max turning angle, toe-out-on-turn, tire radius, tire rotations rate, axle offset, wheel offset, track/wheelbase, two-wheel measurement, vehicle lifting measurement, alignment platform level detection, toe constant value measurement
Measurement Range and Accuracy
| Items | Camber | Caster | S.A.I | Toe | Setback | Thrust Angle | Wheel Offset | Axle Offset |
| Range | ±30° | ±40° | ±40° | ±30° | ±5° | ±5° | —— | —— |
| Accuracy | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1mm | ±1mm |
Comparison of alignment systems configuration
| No | Item | RS-10 | i-9 | RS-8 | RS-6 | i5 | i6 | H6 | RS-5 |
| 1 | Camera Crossbeam | √ | √ | √ | √ | √ | √ | √ | |
| 2 | Target Disks | √ | √ | √ | √ | √ | √ | √ | √ |
| 3 | Wheel Adaptors | √ | √ | √ | √ | √ | √ | √ | √ |
| 4 | Adaptor Hook | √ | √ | √ | √ | √ | √ | √ | √ |
| 5 | Computer | √ | √ | √ | √ | √ | √ | √ | √ |
| 6 | Software | √ | √ | √ | √ | √ | √ | √ | √ |
| 7 | Monitor | 21.5Inch | 32Inch | 32Inch | 32Inch | 14Inch | 32Inch | 21.5Inch | 21.5Inch |
| 8 | Printer | √ | √ | √ | √ | √ | √ | √ | √ |
| 9 | Mouse & Keyboard | √ | √ | √ | √ | √ | √ | √ | √ |
| 10 | Console | √ | √ | √ | √ | √ | |||
| 11 | Column | √ | √ | √ | √ | √ | √ | √ | |
| 12 | Turnplates & Wheel Chocks & Thrust Blocks | √ | √ | √ | √ | √ | √ | √ | √ |
| 13 | Steering Wheel Holder & Brake Pedal Depressor | √ | √ | √ | √ | √ | √ | √ | √ |
| 14 | Antistatic Needle | √ | √ | √ | √ | √ | √ | √ | √ |
| 15 | Drive-on Camera | √ | √ | √ | √ | √ | √ | √ | |
| 16 | Speaker | √ | √ | √ | |||||
| 17 | Lifting Control Box | √ | √ | √ | √ | √ | |||
| 18 | Remote Controller | √ | |||||||
| 19 | Audio Cable | √ | √ | √ | √ | √ |
3D Display Interface
Global origination, authentic effect, clear and easy to understand, controllable and more user-friendly
High-precision Industrial Digital Camera
Continuously monitoring on target position and give feedback on target state at any time providing accurate dynamic measuring results
Camera With Intelligent Angle of View
Camera view changes with the height of the vehicle, available for measurement of any height
Computer Software
Latest software and software updates installed on Brand-name laptop with built-in state drive just quick and durable